Low Voltage Supplier in India
LV Solution
HTS Switchgears P Limited is a leading Low Voltage Supplier in India and situated in Shivane , Pune. offering fully type-tested low voltage switchgear solutions designed for efficient power distribution, protection, and control in demanding electrical installations.
What is Switchgear?
Switchgear refers to a combination of electrical disconnect switches, circuit breakers, and protective devices used to control, protect, and isolate electrical circuits and equipment.
Features of LT Panels
- Distribution of Electrical Power to multiple loads
- Protection against overloads, short circuits, and earth faults
- Safe isolation of circuits for maintenance and operation
- Monitoring and Control of electrical systems
Applications of LT Panels
- Industrial manufacturing plants
- Commercial buildings and utilities
- Infrastructure projects and data centers
- Power distribution panels and motor control systems
- Infrastructure projects and data centers, with expertise as a Switchgear Supplier for data Centers
Fully type tested as per IEC61439-1 & BS EN61439-2:2011 for 4000A LT Panel
APFC Panel Manufacturer in India | Automatic Power Factor Correction Panel
HTS Switchgears P Limited designs and manufactures reliable APFC Panels engineered for efficient power factor correction in industrial and commercial electrical systems.
What is an APFC Panel?
An Automatic Power Factor Correction (APFC) Panel is an electrical control panel designed to automatically maintain the power factor of an electrical system at a desired level. It monitors reactive power and switches capacitor banks automatically to improve overall system efficiency. hybrid apfc includes SVG +Thyristor controlled can be supply as per requirements. STATCOMS for LV and MV application can be offered against requirements.
Why Power Factor Correction Matters?
Low power factor leads to higher electricity bills, increased transmission losses, voltage drops, and penalties from utility providers. By correcting the power factor, electrical systems operate more efficiently, reducing energy losses and improving voltage stability.
Benefits of APFC Panels
- Reduction in electricity penalty charges
- Improved energy efficiency
- Lower system losses and reduced heat generation
- Better voltage regulation
- Enhanced life of electrical equipment
- Optimized transformer and generator capacity utilization
Why Industries Need APFC Panel?
In today’s power-driven industrial environment, efficient energy utilization is not just important—it is essential. Industries operate heavy electrical equipment such as motors, compressors, and transformers that consume reactive power, leading to a low power factor. This results in energy loss, higher electricity bills, and penalties from electricity boards.
This is where an APFC Panel (Automatic Power Factor Correction Panel) becomes a crucial component for every industry.
Why Choose HTS for APFC Panels?
HTS Switchgear Pvt Ltd offers high-performance APFC Panels designed for modern industrial requirements. Our panels are:
- Engineered for maximum energy efficiency
- Built with advanced automatic controllers
- Designed for low maintenance and long life
- Customized as per industry-specific load requirements
- Tested for safety, reliability, and performance
With a strong focus on quality and innovation, HTS Switchgear Pvt Ltd ensures that your electrical systems operate efficiently while reducing operational costs.
LT Panel is an electrical distribution board that receives power from a generator or transformer and distributes it to various equipment and distribution boards. LT panels are designed to work with low electricity consumption, which makes them cost-effective. They ensure efficient power distribution and safety in installations.
These electrical control panels maintain the power factor of the system automatically by switching the capacitor banks as per the needs of the system. The capacitors are controlled by a controller which continuously monitors the relative power demand. This helps in improving energy efficiency and reducing electricity costs.
This panel is installed near a power source, hence the fault level is high. The busbar system in PCC is designed to suit the fault level as well as the temperature rise to 40°C above ambient. Various protections, viz., short circuit, overload, earth fault, under cvoltage, etc., are provided to protect the source and equipment.
The ATS Control Panel is a high performance digital controller for changing the supply power and generator supply. It also includes an automated transfer switch, which is necessary in buildings in the event of a power outage. We provide an ATS Control Panel that can automatically switch loads from mains power to emergency power.
These panels are specifically designed to restore power during power failures and are installed between the generators and the main power supply. When the main supply failure occurs, the panel automatically disconnects the main from the load, activates the generator, and shifts the load to the generator output.
A distribution board, which is fed from the transformer, distributes the power to numerous individual circuits, or DBs. A wide range of compact, elegant, and economical DBs with unique features, designed and engineered to provide user safety, convenience, and operational / maintenance advantages are offered.
LV Starter
This panel consists of various types of DOL starters and star-delta starters. A motor starter panel is a specialized device designed to manage and control electric motors in industrial applications. It is an essential equipment that ensures safe motor operation, enhances efficiency, and extends the lifespan of motors.
Soft starters are used to reduce the starting current of the motor. It provides soft starting for motors. Our manufactured soft starter panel is easy to install and fix. The offered soft starter panel is available at a very cost-effective price. We can supply line-side as well as neutral-side soft-starters
A VFD panel, short for Variable Frequency Drive panel, is an electrical control system used to regulate the speed and torque of AC induction motors. It achieves this by adjusting the frequency and voltage of the electrical power supplied to the motor.These panels typically consist of variable frequency Drive (VFD) unit, power circuit components like rectifiers and IGBTs, control circuity with microprocessor and input/output modules, a Human-Machine Interface (HMI) for user interaction, and devices such as fuses and overload relays.VFD panels find widespread use in industries and commercial application where precise control of motor speed is essential, offering benefits such as energy saving, improved process efficiency, and reduced mechanical stress on equipment.
Auto-transformer Starter is used to start the induction motor. It reduces the starting current of the motor. We can adjust the starting current through the variable taps available at the auto-transformer starter.
FAQs
HTS Switchgears delivers high-quality electrical solutions with advanced manufacturing, strict testing processes, and proven expertise. This ensures reliable performance across diverse industrial applications.
Yes, solutions are tailored based on specific operational needs, ensuring optimal performance, flexibility, and safety for industrial applications.
These systems are widely used in manufacturing units, infrastructure projects, and process industries for reliable power distribution and operational continuity.
Yes, complete support is provided including design, manufacturing, testing, and installation to ensure smooth execution.
LT panels help in efficient power distribution, system protection, and control within industrial facilities, ensuring safety and reliability.